Water is poured into an ice cube tray and then placed in the freezer. It freezes and is removed...
Question:
Water is poured into an ice cube tray and then placed in the freezer. It freezes and is removed from the ice cube tray. Classify this as a batch, continuous, or semi-batch process.
Classification of Process:
Batch process, continuous process, and semi-batch process are the three main classifications of process.
Most of the chemical and physical activities can be classified under these processes.
Answer and Explanation: 1
Become a Study.com member to unlock this answer! Create your account
View this answerBatch process
During this process, no reactants are coming into or out of the system. Thus it is a complete process.
The fermentation process comes...
See full answer below.
Ask a question
Our experts can answer your tough homework and study questions.
Ask a question Ask a questionSearch Answers
Learn more about this topic:
Get access to this video and our entire Q&A library
Continuous Process Improvement in Agile
from
Chapter 4 / Lesson 5
965
Continuous process improvement in Agile deals with accepting feedback and making process changes for better and faster performance and development. Explore the characteristics of process improvements and learn how to identify and implement them.
Related to this Question
- Ice cubes are made by taking heat away from water. Suppose you put 500 g of 20^\circ C water in an ice tray and put it into the freezer. Give the heat removed in the cooling process: a) 20^\circ C to 0^\circ C b) 0^\circ C to 0^\circ C c) 0^\circ C to
- When you put water into an ice cube tray and stick it in the freezer to make ice, which of these is true? (a) It is an exothermic process. (b) The process is referred to scientifically as sublimation. (c) It is an endothermic process. (d) The heat
- An ice cube tray contains enough water at 22.0 to make 18 ice cubes that each has a mass of 30.0 g. The tray is placed in a freezer that uses CF_2Cl_2 as a refrigerant. The heat of vaporization of CF_2Cl_2 is 158 J/g. What mass of must be vaporized in th
- An ice cube tray is removed from the freezer section of a refrigerator. As it melts, the ice a. loses all entropy b. increases in entropy c. decreases in entropy d. constant entropy.
- An ice cube at 0 degrees C was dropped into 30.0 g of water in a cup at 45.0 degrees C. At the instant that all of the ice was melted, the temperature of the water the cup was 19.5 degrees C. What wa
- A cold pack filled with gel, with a mass of 15 g, is frozen. It is placed in 1,000 g of water at 50 degrees C. When the ice pack is completely thawed, the water is at 22 degrees C. a) What is the enthalpy of fusion of the ice pack? b) Explain why cold p
- When you make ice cubes: A) the heat of vaporization must be removed. B) the process is referred to scientifically as sublimation. C) it is an endothermic process. D) it is an exothermic process.
- Two ice cubes at 0.0 degrees Celsius are dropped in an insulated container containing 93.8 grams of water at 27.0 degrees Celsius. After all the ice is melted, the final temperature of the system is 17.0 degrees Celsius. What is the mass of the ice cubes
- In a closed system composed of ice and liquid water in equilibrium at 0oC: a.Liquid water will freeze at the same rate that ice melts.
- An ice cube at 0 degrees Celsius was dropped into 30.0 g of water in a cup at 45 degrees Celsius. At the instant that all of the ice was melted, the temperature of the water in the cup was 19.5 degree
- In a closed system composed of ice and liquid water in equilibrium at 0oC:a. The liquid water will slowly freeze.
- You are heating crushed ice and a small amount of water and monitoring the temperature of the icy slurry until it reaches the point were the ice is nearly melted. How does the temperature change during this process? a) The temperature drops as the ice abs
- Dry ice (solid CO2) is taken from the freezer, placed into a container, and held at room temperature. With time, the volume occupied by the block of dry ice decreases, and there is a visible cloudiness in the air around the block. Is this a physical or ch
- Water in the liquid state is more dense than water in the solid state. This fact is consistent with the knowledge that: A. A can of cola collapses when it freezes. B. Ice cubes sink in a container of liquid water. C. Ice cubes float in a container of liqu
- In a closed system composed of ice and liquid water in equilibrium at 0oC:a. The ice will slowly melt.
- A 10 g ice cube, initially at 0 degrees C, is melted in 100 g of water that was initially 20 degrees C. After the ice has melted, the equilibrium temperature is 10.93 degrees C. Calculate the heat gained by the ice cube after it melts (the specific heat f
- An ice cube at 0.00 degrees Celsius with a mass of 8.32 g is placed into 55 g of water, initially at 25 degrees Celsius. If no heat is lost to the surroundings, what is the final temperature of the entire water sample after all the ice is melted? Give you
- A soft drink (220.0 mL of mostly water) initially at 14 °C is cooled by adding 136.0 g of ice cubes at 0 °C. What mass of ice remains when the temperature of the drink reaches equilibrium (water and ice at 0 °C)? The enthalpy of fusion of wate
- An 8.5 g ice cube is placed into 255 g of water. Calculate the temperature change in the water upon the complete melting of the ice.
- A 14.7 g ice cube is placed into 324 g of water. Calculate the temperature change in the water upon complete melting of the ice.
- A 14.7 g ice cube is placed into 314 g of water. Calculate the temperature change in the water upon complete melting of the ice.
- A 73.8-g aluminum ice tray in a home refrigerator holds 323 g of water. Calculate the energy in kJ that must be removed from the tray and its contents to reduce the temperature from 19.6 degrees C to 0.0 degrees C, freeze the water, and drop the temperatu
- A beaker with water and the surrounding air are all at 24 C. After ice cubes are placed in the water, heat is transferred from: a) the ice cubes to the air b) the beaker to the air c) the water to the ice cubes d) the water to the beaker
- If you start with two cubes of ice, each with a mass of 25.0 g and at a temperature of -10 degrees Celsius, and 25.0 mL of water with a temperature of 100 degrees Celsius, what will the final temperature of the mixture be? Assume the final state is liquid
- Consider that you have an ice cube of pure water in a glass of pure water. Under which of the following conditions would the ice cube melt reversibly? a. When the room temperature is greater than 0 C. b. When the room temperature is less than 0 C. c. Wh
- Ice at 0.0 ^oC is placed in a Styrofoam cup containing 360 g of a soft drink at 25.8 ^oC. The specific heat of the drink is about the same as that of water. Some ice remains after the ice and soft drink reach an equilibrium temperature of 0.0 ^oC.
- Suppose that a mixture of ice and water is placed in a refrigerator that is held at the freezing point of water, exactly 0.0 degrees C. Calculate Delta S for the ice-water mixture, Delta S for the refrigerator, and Delta S total when 5.00 g of ice forms.
- The specific heat capacity of ice is Cs,ice = 2.09 J/g^oC and the heat of fusion of ice is 6.02 kJ/mol. When a small ice cube at -10 ^oC is put into a cup of water at room temperature, which plays a larger role in cooling the liquid water: the warming of
- If you were somehow able to sit at the surface of an ice cube and were able to slow the movement of water molecules from the solid to the liquid phase, what would eventually happen to the ice cube? a. It would increase in size. b. It would melt because yo
- What would be the best method for lowering the freezing point of water in an ice tray that is in the freezer? a) add some table salt to the water b) decrease the temperature of the freezer
- Liquid nitrogen freezes to a white solid at -210.0 ^oC, with an enthalpy of fusion of 0.71 kJ/mol. What is its entropy of fusion? Is freezing biological tissue in liquid nitrogen an example of a reversible process or an irreversible process?
- A piece of ice is kept at -20 degrees Celsius in a freezer. The ice is defined as our system. Which statement(s) explains the fact that the ice will not melt under this condition? Select all that apply. a. Delta Stotal for this melting process would be po
- (a) Why the temperature remains constant while a pure liquid freezes? (b) Why the temperature drop while a solution freezes?
- When water is supercooled, it freezes at a temperature below 0.0 degrees C. If 10.9 kJ of heat is released when 2.00 moles of supercooled water at -15.0 degrees C freezes, calculate the molar enthalpy of fusion for ice at 0.0 degrees C and 1 atm. Assume t
- A 100.0 g sample of water at 80 degrees C, is mixed with 10 g of ice cubes at 0 degrees C. The heat of fusion of ice is 335 J/g, and the specific heat of liquid water is 4.18 J/g degrees C. Calculate the final temperature in degrees Celsius of the mixture
- An 8.4 g ice cube is placed into 255 g of water. Calculate the temperature change in the water upon the complete melting of the ice. Assume that all of the energy required to melt the ice comes from t
- A glass of ice water was made by adding six 25 g ice cubes to one litre of water. If the water was initially at 25 degrees C and the ice cubes were initially at -15 degrees C, what is the final temperature of the ice water?
- During a very cold winter, the temperature may remain below freezing for extended periods. Fallen snow cannot melt. However, it can disappear. This is possible because a solid can vaporize directly, without passing through the liquid state. Is this proces
- Four ice cubes at exactly 0 degrees Celsius having a total mass of 52.5 grams are combined with 115 grams of water at 77 degrees Celsius in an insulated container. If no heat is lost to the surroundings, what will be the final temperature of the mixture?
- If you fill a glass to the brim with ice water and the ice melts, what will happen? a. The glass will overflow as the ice turns to water. b. The level of water in the glass will remain unchanged as the ice melts. c. The water level will drop slightly as t
- When heat is being removed from a liquid, why does the temperature of the liquid at its freezing point remain constant until all of the liquid freezes?
- When water freezes and becomes solid ice, the hydrogen bonds create a crystal structure and there is fixed space between each water molecule. This causes ice to a. become more dense than liquid water
- You pour 240 mL of Coke into a glass, where the T of the beverage is at 10.5 degrees C. You then add one ice cube of 45 g. Determine the final temperature and the amount of ice remaining, if any.
- By Two 20 0g ice cubes at-13.0 �C are placed into 205 g of water at 25.0 �C Assuming no transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts he
- In a closed system composed of ice and liquid water in equilibrium at 0oC:a. The liquid will slowly evaporate.
- An ice cube that is 25.00 g (temp -20 C) is placed into 225.00 g of H2O that is 22 degrees C. What will the temperature be when the ice cube has just melted? (Use 4.184 J/K.g for the specific heat capacity of ice and water.) If the water is then heated to
- A chunk of ice at room temperature melts, even though the process is endothermic. Why?
- Two 20.0 g ice cube at -20.0 degrees C are placed into 215 g of water at 25.0 degrees C. Assuming no energy is transferred to or from the surrounding, calculate the final temperature of the water after all the ice melts.
- An 8.4 g ice cube is placed into 260 g of water. Calculate the temperature change in the water upon the complete melting of the ice. Assume that all of the energy required to melt the ice comes from the water. Express your answer in terms of the initial t
- A 50.0-gram piece of CO2(s) ("dry ice") is sealed inside a 0.250-L container held at 20 degrees Celsius. Based on the phase diagram of CO2, what state(s) of matter are present inside the container?
- Four ice cubes at exactly 0 degrees C with a total mass of 52.0 g are combined with 155 g of water at 90 degrees C in an insulated container. (Delta H_fus = 6.02 kJ/mol, c_water = 4.18 J/g degrees C). If no heat is lost to the surroundings, what is the fi
- Water at 0 degrees C was placed in a dish inside a vessel maintained at low pressure by a vacuum pump. After a quantity of water had evaporated, the remainder froze. If 9.31 g of ice at 0 degrees C was obtained, how much liquid water must have evaporated?
- A 10.0 g piece of ice at 0 ^oC is added to 20.0 g of water at 5 0.0 ^oC in a Dewar Flask. For water delta_fus H^phi = 5980. J/mol. The heat capacity of liquid water may be considered constant for this question and is 4.184 J/g-K. Consider the Dewar flask
- Refrigerators and freezers remove heat from food by evaporating volatile liquids such as CF4 and then recompressing the vapor back into a liquid. Calculate what mass of water at 0.0 degrees Celsius can be converted into ice at 0.0 degrees Celsius when 1.0
- Three ice cubes (55 g each) at 0.00 degree C are dropped into 2.00 cups of tea. The tea was at a room temperature (25 degree C) before the ice was added. After the ice and tea have been mixed and thermal equilibrium has established the temperature of the
- A 20.0 g ice cube is placed into 300 g of water at 25 deg C. What is the final temperature of the water? Assume that all of the energy required to melt the ice comes from the water and this system is thermally isolated (no heat escapes).
- A 14.2 g ice cube is placed into 330 g of water. Calculate the temperature change in the water upon complete melting of the ice. Hint: Determine how much heat is absorbed by the melting ice and then
- A 14.7 g ice cube is placed into 324 g of water. Calculate the temperature change in the water upon complete melting of the ice. Hint: Determine how much heat is absorbed by the melting ice and then u
- An 18-gram ice cube initially at -10 degrees Celsius is dropped into 120 grams of water initially at 25 degrees Celsius. What is the final temperature of the system after all of the ice has melted? Assume that no heat is lost to the container or the surro
- A 0.6850-kg ice cube at -12.40 degrees C is placed inside a chamber of steam at 365.0 degrees C. Later, you notice that the ice cube has completely melted into a puddle of water. If the chamber initia
- Four ice cubes at exactly 0 degree C with a total mass of 55.0 g are combined with 130 g of water at 80 degree C in an insulated container. (delta H degree fus = 6.02 kJ / mol, water = 4.18 J / g degr
- If there is no frost or built up ice in a freezer and you introduce water vapor into the freezer (by opening it on a humid day), what would happen?
- The melting of solid ice to give liquid water has H = + 1.44 kcal/mol (+6.02 kJ/mol) and S = +5.26 cal/(mol?K) (+22.0 J/(mol?K)). What is the value of G for the melting process at -9 degree C?
- The melting of ice at 273.15 K and constant 1 atm pressure is endothermic ( delta H > 0), but the liquid is more dense than the solid. We can conclude that for the phase change: a) The internal energy of H2O molecules has decreased. b) The internal energy
- A 14.7 g ice cube is placed into 314 g of water. Calculate the temperature change in the water upon complete melting of the ice. Hint: Determine how much heat is absorbed by the melting ice and then use q =mC*Delta T to calculate the temperature change o
- A 17.5 g mass of ice at 273 K is added to 125 g of H_2O (l) at 325 K at constant pressure. Is the final state of the system liquid or ice? calculate Delta S for the process. Is the process spontaneous?
- A 17.5 g mass of ice at 273 K is added to 125 g of H_2O(l) at 325 K at constant pressure. Is the final state of the system ice or liquid water? Calculate Delta S for the process. Is the process spontaneous?
- An ice cube at 0.00 degrees C with a mass of 23.5 g is placed into 550.0g of water, initially at 28.0 degrees C, in an insulated container. Assuming that no heat is lost to the surroundings, what is the temperature of the entire water sample after all of
- An ice cube at 0.00 degrees C with a mass of 23.5 g is placed into 550.0 g of water, initially at 28.0 degrees C, in an insulated container. Assuming that no heat is lost to the surroundings, what is the temperature of the entire water sample after all of
- Four ice cubes at exactly 0 degree C with a total mass of 53.5 g are combined Four ice cubes at exactly 0 C with a total mass of 53.5 g are combined with 160 g of water at 80 degree C in an insulated
- If a 6.8 g ice cube is placed in 120.0 mL of warm water, what is the change in temperature of the water after the ice has completely melted? The enthalpy of fusion of water is 6.02 kJ/mol, and the specific heat capacity of the liquid is 4.184 J/g/K. Assum
- If a 3.4 g ice cube is placed in 460.0 mL of warm water, what is the change in temperature of the water after the ice has completely melted? The enthalpy of fusion of water is 6.02 kJ/mol, and the specific heat capacity of the liquid is 4.184 J/g/K. Assum
- A piece of ice is kept at -20 C in a freezer. The ice is defined as our system. Which statement(s) explains the fact that the ice will not melt under this condition? i) S t o t a l for this melting process would be positive ii) The increase in
- A) Four ice cubes at exactly 0 degree C with a total mass of 53.5 g are combined with 140 g of water at 85 degree C in an insulated container. (Delta H degree_{fus} = 6.02 kJ / mol, cwater = 4.18 J /
- Four ice cubes at exactly 0 degree C with a total mass of 52.5 g are combined with 125 g of water at 90 degree C in an insulated container. (Delta H degree_{fus} = 6.02 kJ / mol, water=4.18J /g degree
- A 10-gram ice cube at 0 degrees Celsius is melted in 100 grams of water initially at 20 degrees Celsius. The equilibrium temperature of the mixture is 10.93 degrees Celsius. Calculate: a. the heat lost by the water b. the heat absorbed by the ice to achie
- Instant ice packs are made by dissolving ionic compounds in water (crushing the ice pack releases the water into the solid ionic compound). Which of the following ionic compounds do you predict will give the most cooling per gram? Assume that all are comp
- Two 20.0g ice cubes at -21.0 C are placed into 275g of water at 25.0 C. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all of the ice
- A 20.0 g ice, initially at 0 degree C is melted in 50.0 g of water that was initially at 25 degree C. After the ice is melted, the equilibrium temperature is 12.5 degree C. The specific heat of water is 4.186 J/g \cdot degree C and that of ice is 2.093 J/
- 400 g ice at -15 degrees C and 500 g water at 45 degrees C are mixed together in a insulating thermos flask so that they come to equilibrium with essentially no heat transfer to the outside world. What is the mass of ice that melts?
- Four ice cubes at exactly 0 degree C with a total mass of 53.0 g are combined with 140 g of water at 90 degree C in an insulated container. (delta H fus=6.02 kJ/mol, c water=4.18J/g degree C). If no h
- A 24 g ice cube at -76 degree C is placed in a lake whose temperature is 8 degree �C. Calculate the change in entropy of the cube-lake system as the ice cube comes to thermal equilibrium with the lake
- The freezing of water at 0 degrees C can be represented as follows: H_2O(l) to H_2O (S) The density of liquid water is 1.00 g/cm^3. The density of ice is 0.92 g/cm^3. Explain why applying pressure causes ice to melt.
- An ice cube at 0 degrees Celsius with a mass of 11 grams is dropped into a vessel containing 76 grams of water at 52 degrees Celsius. What is the final temperature of the H2O after the ice cube has melted?
- Water has a density of 0.997g/mL at 25 degC; ice has a density of 0.917g/mL at -10 degC. If a soft drink bottle with volume of 1.50L is completely filled with water and then frozen to -10 degC, what volume does the ice occupy?
- On a counter is a glass of water with ice cubes floating in it. You measure the temperature and find it to be 0.0 degrees Celsius. What will happen to the temperature if more ice is added to the glass?
- Suppose you put a cube of ice of mass 10.0 g into a glass of water with 0^oC. When the ice melts, about 3.3 kJ of energy is absorbed from the surroundings as heat. What are the change in entropy of (a) the sample (the ice) and (b) the surroundings (the gl
- Two 20.0-gram ice cubes at -10.0 degrees Celsius are placed into 275 grams of water at 25.0 degrees Celsius. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
- One hundred grams of liquid H2O at 55 deg C is mixed with 10 g of ice at -10 deg C. The pressure is kept constant, and no heat is allowed to leave the system. The process is adiabatic. Calculate the final temperature for the system.
- A glass of ice water was made by adding six 25 g ice cubes to one liter of water. If the water was initially 25 degrees C and the ice cubes were initially at -15 degrees C, what is the final temperatu
- Four ice cubes at exactly 0 degrees Celsius having a total mass of 55.0 g are combined with 120 g of water at 77 degrees Celsius in an insulated container. If no heat is lost to the surroundings, what
- Some ice cubes at 0 degree C with a total mass of 403 g are placed in a microwave oven and subjected to 750 W (750 J/s) of energy for 5.00 minutes. What is the final temperature of the water! Assume all the energy of the microwave is absorbed by the water
- Four ice cubes at exactly 0 degree C with a total mass of 53.0 g are combined with 160 g of water at 75 degree C in an insulated container. (Delta H degree fus = 6.02 kJ/mol, cwater = 4.18J/g * degree C). If no heat is lost to the surroundings, what is th
- Two 20.0-gram ice cubes at -18.0 degrees Celsius are placed into 205 grams of water at 25.0 degrees Celsius. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
- Two 20.0-gram ice cubes at -13.0 degrees Celsius are placed into 215 grams of water at 25.0 degrees Celsius. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
- Two 20.0-gram ice cubes at -18.0 degrees Celsius are placed into 245 grams of water at 25.0 degrees Celsius. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
- Two 20.0-gram ice cubes at -20.0 degrees Celsius are placed into 295 grams of water at 25.0 degrees Celsius. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
- Two 20.0 g ice cubes at 21.0 degrees C are placed into 275 g of water at 25 degrees C. Assume no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
Explore our homework questions and answers library
Browse
by subject