# Prepare 10 mL of 0.01 M, 0.02 M, 0.05 M, and 0.06 M CuSO_4 solutions using the stock solution....

## Question:

Prepare 10 mL of 0.01 M, 0.02 M, 0.05 M, and 0.06 M CuSO{eq}_4 {/eq} solutions using the stock solution. Your procedure should give specific steps and amounts.

## Dilution Process:

The dilution process pertains to the decreasing of the amount of solute in a given solution to make a solution with a lower concentration. Dilution is often done by making use of the formula below:

{eq}\rm C_1V_1=C_2V_2 {/eq}

where:

C1 is the initial concentration

V1 is the initial volume

C2 is the final concentration

V2 is the final volume

## Answer and Explanation: 1

Become a Study.com member to unlock this answer! Create your account

View this answerIn our calculation, we will assume that we have 1 liter of 1 M of copper sulfate.

**A. 10 mL of 0.01 M**

{eq}\rm...

See full answer below.

#### Ask a question

Our experts can answer your tough homework and study questions.

Ask a question Ask a question#### Search Answers

#### Learn more about this topic:

from

Chapter 8 / Lesson 5Want to know how to calculate dilution factor? See dilution equations, the dilution formula, and learn how to dilute acid and how to dilute a solution.

#### Related to this Question

- Can you explain how to prepare 150 mL of a 0.800% (w/v) aqueous CuSO4 solution using a 0.182 M CuSO4 stock solution?
- Calculate the volume of 1.0 M CuSO_4 stock solution you should use to make 100 mL of a 0.010 M CuSO_4 solution.
- A 100.0-mL sample of a 0.10 M stock solution of Cu2+ is to be prepared using CuSO4 5H2O (molar mass = 249.68). a. How many grams of CuSO4 5H2O must be measured for the preparation? b. Describe the procedure for the preparation of the solution using 0.01 M
- How could you prepare 250 mL of a 0.35 M CuSO4 solution from a 2.00 M CuSO4 solution?
- How would you prepare 150 mL of a 0.800% (w/v) CuSO4 solution from a 0.182 M CuSO4 solution?
- How could you prepare 300 mL of a 0.25 M CuSO4 solution from a 2.00 M CuSO4 solution?
- Determine the mass of CuSO_4 . 5 H_2O that is needed to prepare 50.00 mL of a 0.07000 M solution.
- How would you prepare 10 mL of 0.5 mL CuSO_4 cdot 5H_2O solution from 10 M CuSO_4 cdot 5H_2O?
- How will you prepare 0.33% solution of CuSO4 (solid) of 400ml? From 0.33% CuSO4, show the preparation of 0.11% CuSO4 of 150 ml.
- Describe how you could prepare 105 mL of a 0.32 M CuSO4 5H2O solution.
- Calculate the mass (in grams) of CuSO4 you must measure out to prepare 100 mL of a 0.025 M CuSO4 solution.
- What is the % concentration (m/v) of a solution prepared by dissolving 160.0 g of CuSO_4 in enough water to make 250 mL of a solution?
- How many grams of CuSO_4 cdot 5H_2O are needed to prepare 50 ml of a 0.75 M solution?
- What is the mass of CuSO4 needed to prepare a 125 mL solution of 3.5 M?
- How many grams of CuSO4 5H2O are needed to prepare a 0.020 M stock solution?
- Calculate the mass (in g) of CuSO_4 \cdot 5H_2O (MM = 249.68 g/mol) necessary to prepare 50.0 mL of a solution having a concentration of 0.500 M CuSO_4.
- What mass of CuSO_4 times 5H_2O is required to prepare 4.0 mL of 0.040 M CuSO_4 solution?
- How would you prepare a 500 ml solution of 5% CuSO4 using CuSO4.5H2O hydrate?
- How many mL of a 1.10 M CuSO4 solution must be diluted to make 602 mL of a 0.400 M CuSO4 solution?
- How many grams of solute are needed to prepare 2.50 x 102 mL of 0.145 M CuSO4 solution?
- Prepare 20 mL of 0.050 M CuSO4 solution by mixing 1 mL of 1.0 M CuSO4 solution with 19 mL of distilled water. Setup a concentration cell in two wells of the cell you made by adding 5mL of 0.050 M CuSO
- In an experiment designed to determine the concentration of Cu^{+2} ions in an unknown solution, you need to prepare 100 mL of 0.10 M CuSO_4 as your stock solution. How many grams of CuSO_4 (s) should
- How many grams of CuSO4 5H2O are needed to prepare 150.0 mL of a 0.75 M CuSO4 solution?
- How many grams of CuSO4 do you need to make 500 mL of a 0.10 M solution?
- How many grams of CuSO4 do you need to make 400 mL of a 0.15 M solution?
- How many grams of CuSO4 5H2O are needed to prepare 100.0 mL of a 0.10 M solution?
- Describe how you could make 10 mL of a 0.5 M CuSO4 5H2O solution from a 10.0 M CuSO4 5H2O solution.
- Describe how you could make 40 mL of a 3% (m/v) CuSO4 solution.
- Calculate the mass of CuSO_4.5H_2O required to prepare 50 mL of 0.040 M CuSO_4 solution.
- Explain how you would make 10.00 mL of a 0.03 M Cu^{2+} solution from a standard solution of 0.10 M CuSO_4.
- What is the molarity of a solution prepared by dissolving 160.0 g of CuSO_4 in enough water to make 250 mL of a solution?
- What is the molarity of a solution that contains 23.095 g of CuSO4 in 103.9 mL of solution?
- Cu(NO_3)_2 \cdot 3H_2O (FW 241.58) will be used to prepare your copper stock solution. How much will you need to make up 250 mL of stock solution containing 250 \mu g/mL (= 250 ppm) as copper (250ppm Cu)?
- Describe how to make 450 mL of a 1.15% solution of CuSO4.
- A solution contains 37 g CuSO4 and 111 g of water. Calculate the concentration by mass of solution.
- Calculate the volume needed to dissolve 11.2 g CuSO_4 to prepare 0.140 M?
- To make 800mL of a 0.25 M solution of CuSo_4 how much 1M CuSo_4 solution would be needed?
- How much CuSO_4.5H_2O is required to prepare 100 ml of a 0.050 M aqueous stock solution?
- Calculate the mass percent of CuSO_4 in a solution whose density is 1.30 g/mL and whose molarity is 1.36 M. %CuSO_4 =
- How much of a 1 M CuSO4 stock solution should be added to 500 mL of media to achieve a final concentration of 20 mu m CuSO4?
- Determine how much CuSO4-5H2O is required to prepare a 50ml solution of 0.0200M CuSO4
- What is the molarity of a solution with a volume of 974 mL containing 17 g of CuSO4?
- Calculate the concentration (M) of copper in each sample. The Cu^2 standard solution was prepared by dissolving 3.928 g CuSO_4 cdot 5H_2O into 1.000 L distilled water. The NH_4OH used in these solutions is 3 M. Following are the mixtures for the solution
- If 25.00 mL of 5.80 M CuSO_4 solution is diluted to 2.0 L, what is the molarity of the diluted solution?
- A 4.7% (m/v) CuSO4 solution has a volume of 57.4 mL. How many grams of CuSO4 are in the sample? a. 0.082 g b. 8.2 g c. 820 g d. 0.27 g e. 2.70 g
- How many grams of CuSO_4 cdot H_2O are needed to prepare 50 mL of a 4% (w / v)solution of CuSO_4?
- How many moles of CuSO4 do you need to make 250 mL of a 0.05 M CuSO4 solution?
- How many mL of 0.0250 M CuSO4 solution contains 1.75 g of solute?
- Determine the molarity of each of the following solutions. (a) 2.78 kg of CuSO4 7 H2O in 315 L of solution (b) 0.005531 mol of Cl2 in 10.40 mL of solution (c) 0.000890 g of C2H5NO2 in 2.20 mL of solution
- The final volume of the solution is 284 mL. What is the concentration of CuSO_4 in the final solution, in mol/L? mass = 1.787 g of CuSO_4 \cdot 5H_2O = 7.157 times 10^{-3}
- What is the concentration of a solution formed by diluting 7 ml of 5.4M CuSO_4 \cdot 5H_2O solution to 50ml?
- How many grams of CuSO4 are in 1.6 L of a 0.125 M CuSO4 solution?
- If you mix 3.0 mL of CuSO4 (0.060 M) with 12.0 mL of HNO3 (1.0 M), how do you calculate the concentration of CuSO4?
- What mass of solute is needed to prepare 400 mL of 0.850 M CuSO4 from CuSO4 5H2O?
- a) How do you make 100.00 mL of 0.1000 M copper (II) sulfate solution? b) From your prior solution, how would you prepare 25.00 mL for each of 0.0800 M, 0.0600 M, 0.0400 M, 0.0200 M and 0.0080 M copper (II) sulfate?
- If you add 4.00 mL of pure water to 6.00 mL of 0.0250 M CuSO_4, what is the concentration of copper (II) sulfate in the diluted solution?
- Find the mass percent of CuSO_4 in a solution whose density is 1.30 g/mL and whose molarity is 1.36 M.
- How many grams of CuSO4 5H2O are in 3.00 L of a 0.275 M solution?
- Calculate the molar concentration of a solution prepared by dissolving 80.0 g of CuSO_4 \cdot 5H_2O insufficient water to obtain 1500 L of solution.
- Calculate the molarity (M) for each of these solutions: (a) 31.45 g of NaCl in 1.50 L (b) 14.41 g of MgS in 0.750 L (c) 0.4567 g of CuSO_4 in 825 mL (d) 25.5 mg of NaCN in 5.00 mL
- If 2.40 g of CuSO4 is dissolved in 8.57 x 10^2 mL of 0.360 M NH3, calculate the concentrations of Cu^2+, NH3, and Cu(NH3)4^2+.
- How many mL of a 1.0 M Cu(NO3)2 stock solution are required to prepare 100 mL of a 0.010 M Cu(NO3)2 solution?
- How many mL of a 0.010 M Cu(NO3)2 stock solution are required to prepare 100 mL of a 1.00 x 10-4 M Cu(NO3)2 solution?
- You need to make 4200 mL of 0.450 M CuSO4. How many grams of CuSO4 do you need?
- How would you prepare 20 mL of a 0.10 M solution from a 1.0 M stock solution?
- Determine the molarity of a solution containing 2.5 moles CuSO_4 in 4.2 L of water.
- How many grams of solute are needed to prepare each of the following solutions? a) 1.000 L of 0.210 M NaCl b) 250.0 mL of 0.120 M CuSO_4 c) 500.0 mL of 0.400 M CH_3OH.
- calculate the molarity of each ion in a 0.025 aqueous solution of (a) kcl; (b) CuSO4; (c) CaCl2
- A solution of copper(II) sulfate is prepared by placing 5.80 g copper(II) sulfate in a flask and adding enough water to prepare 125 mL of solution. When 25.0 mL sample of the solution is added to 125 mL of sodium hydroxide (0.125 M), determine the mass of
- If 4.00 mL of 0.0443 M CuSO4 is diluted to 10.0 mL with pure water, what is the molar concentration of copper(II) sulfate in the diluted solution?
- A chemist must prepare 725 mL of 275 mM aqueous copper(II) sulfate (CuSO4) working solution. He'll do this by pouring out some 0.316 M aqueous copper(II) sulfate stock solution into a graduated cylinder and diluting it with distilled water. Calculate the
- Molarity, is the concentration of a solution expressed in terms of moles solute per liter of solution. What is the molarity of a solution that contains 27.250 g CuSO_4 in 181.8 mL?
- What volume of water should be added to 500 mL of a 1.0 mol/L CuSO_4 solution to dilute it to 0.5 mol/L?
- Calculate the amount of sulfate ions in a 0.0750 M CuSO4 solution.
- Calculate the number of moles of CuSO_4 contained in 100 ml of 1mole CuSO_4 solution. Also, find the number of SO_4^{2-} ions in it .?
- A stock solution is prepared by adding 30 mL of 1.5 M NaNO2 to enough water to make 45 mL. How many moles of NO2- are in 40 mL of the stock solution?
- Consider the following : Weigh out 1.25 g of CuSO4 X 5H2O and add it to 40 mL of distilled water. Mix well until the copper sulfate is in solution. Add distilled water until 50 mL of solution. This is solution A. Calculate the concentration of soluti
- What is the total molar concentration of all the ions in 0.040 M solutions of the following salts in water? (a) 0.040 M KCl. (b) 0.040 M CuSO_4. (c) 0.040 M CaCl_2.
- 2.00 liters of 0.580 M CuSO4 solution is electrolyzed by passing 1.70 amps through the solution for 2.00 hr using inert electrodes. What is the Cu2+ in the solution at the end of the electrolysis
- Determine the mass of Co(NO_3)_2 \cdot 6H_2O to prepare 250 mL of a 0.50 M stock solution.
- How many grams of Copper (II) sulfate pentahydrate would you use to make 400.0 mL of 0.750 M solution?
- A 65.25 g sample of CuSO_4.5 H_2O (M= 249.7) is dissolved in water to make 0.800 L of solution. What volume of this solution must be diluted with water to make 1.00 L of 0.100 M CuSO_4?
- You are asked to prepare 250 mL of 3.0% morphine sulfate solution. You have four 50 mL vials of morphine sulfate labeled as 50 mg/mL. Do you have enough stock solution? How will you prepare the aqueous solution?
- Determine the volume of water (in mL) that was added to 29.9 mL of the stock solution (2.94M) to prepare a 0.855 M copper (II) perchlorate solution.
- Consider the following steps below: Weigh out 1.35 g of CuSO_4 \times 5H_2O and add to 35 mL of distilled water. Mix well until the copper sulfate is in solution. Add distilled water until there is 55 mL of solution. This is solution A. Calculate the c
- If a 100 mg/mL stock solution of Bovine Serum Albumin (BSA) is available, describe the correct steps to prepare working solutions of BSA with concentrations of 50 g/ L, 5 g/ L, and 0.5 g/ L, each with a volume of at least 500 L.
- Calculate the concentration (molarity) of copper(ii) sulfate, CuSO_4, in 1L of a solution containing 200 g Copper-Sulfate-Pentahydrate (CuSO_4 \cdot 5H_2O)?
- A 0.25 M CuSO_4 solution is required. A student is given 60 g of copper sulphate. Calculate the volume of water needed to dissolve copper sulphate crystals and make this solution.
- A stock solution of K_2SO_4 is available to prepare solutions that are more dilute. Calculate the volume, in mL, of 2.0 M solutions of K_2SO_4 required to prepare exactly 50 mL of a 0.42 M solution of K_2SO_4.
- Describe how you would prepare from the specified stock solution: 400 mL of 0.45 M urea starting with a 6 M urea stock solution.
- An aqueous solution is 15.0% by mass of copper(II) sulfate pentahydrate, CuSO_4 . 5H_2O. What is the molarity of CuSO_4 in this solution at 20 degrees C? The density of this solution at 20 degrees C is 1.167 g/mL.
- Calculate the minimum volume of 1.10 M CuSO_4 solution that is required to ensure complete reaction of 1.04 gram of Fe. Since you do not know which reaction will be the one to occur, you must base the calculation on whichever of the equations requires mor
- How many mL of copper (II) stock solution are required to make 25.00 mL of a 0.181 M solution?
- A solution is prepared by dissolving 10.8g ammonium sulfate in enough water to make 100.0 ml of stock solution. A 10.00 ml aliquot (sample or portion)of the stock solution is removed and is added to 5
- Calculate the minimum volume of 1.10 M CuSO_4 solution that is required to ensure complete reaction of 1.04 g of Fe. Since you do not know which reaction will be the one to occur, you must base the calculation on whichever of the equations requires more C
- Find the amount of CuSO4.5H2O needed to prepare 500 mL of 0.25 M solution.
- A solution is prepared by dissolving 5.0 g of stannic nitrate in enough water to make 250.0 mL of stock solution. A 15.0 mL aliquot (portion) of this stock solution is then removed and added to 75.0 m
- A stock solution of K2S is available to prepare solutions that are more dilute. Calculate the volume, in mL, of a 2.0 M K2S solution required to prepare exactly 250 mL of a 0.34 M solution of K2S.
- How many grams of Cu(OH)_2 will precipitate when the excess KOH solution is added to 57.0 ml of 0.711 m CuSO_4 solution?
- How many grams of Cu(OH)_2 will precipitate when excess KOH solution is added to 62.0 ml of 0.695 M CuSO_4 solution?