In the separation of components of a mixture of ammonium chloride, salt and sand, errors can...
Question:
In the separation of components of a mixture of ammonium chloride, salt and sand, errors can easily occur.
In each case of each component, determine if the resulting products will increase, decrease or remain unchanged if some of the mixture splattered during the first heating.
Mixture:
In chemistry, a mixture is a substance that is composed of two or more substances. Depending on the appearance and uniformity of the mixture, it can be classified as a homogeneous or heterogenous mixture. Homogeneous mixtures also known as solutions have a uniform appearance such that the individual components are not recognizable. The opposite occurs in heterogeneous mixtures where you can recognize the difference in the components.
Answer and Explanation:
Become a Study.com member to unlock this answer! Create your account
View this answerSee full answer below.
Ask a question
Our experts can answer your tough homework and study questions.
Ask a question Ask a questionSearch Answers
Learn more about this topic:

from
Chapter 6 / Lesson 3What is a mixture in chemistry? Learn the types and properties of mixtures. Also, see various examples of mixtures.
Related to this Question
- In the separation of components of a mixture of ammonium chloride, salt and sand, errors can easily occur. In each case of each component, determine if the resulting products will increase, decrease or remain unchanged if the residue was washed with tap
- In the separation of components of a mixture of ammonium chloride, salt and sand, errors can easily occur. In each case of each component, determine if the resulting products will increase, decrease or remain unchanged if the sublimation was abruptly sto
- In the separation of components of a mixture of ammonium chloride, salt and sand, errors can easily occur. In each case of each component, determine if the resulting products will increase, decrease or remain unchanged if the residue from filtration was
- In the separation of components of a mixture of ammonium chloride, salt and sand, errors can easily occur. In each case of each component, determine if the resulting products will increase, decrease or remain unchanged if a watch glass was not used to co
- Salt water is classified as a: a) compound because the proportion of its atoms is fixed. b) compound because the proportion of its atoms can vary. c) mixture because the proportion of its components is fixed. d) mixture because the proportion of its compo
- How can a mixture of ammonium chloride, KCl, lead (2) chloride could be separated in the laboratory?
- The following process involves a separation of either a mixture into substances or a compound into elements. Decide whether a physical process or a chemical reaction is required: Fine crystals of silver chloride are separated from a suspension of the cry
- A student found that her mixture was 15% NH4Cl, 20% NaCl, and 75% SiO2. Assuming her calculations are correct, what is the most likely source of error in her experiment?
- If you are a mixture of ammonium chloride, barium sulfate, and sodium chloride how would you produce a pure dry sample of each of those chemicals for the mixture?
- The following process involves a separation of either a mixture into substances or a compound into elements. Decide whether a physical process or a chemical reaction is required: Sodium metal is obtained from the substance sodium chloride.
- If digesting the precipitate were omitted in a procedure, will the reported percentage of limiting reactant in the salt mixture be too high, low or unaffected?
- A student reported the following composition of an unknown mixture: 25% NH4Cl, 30% NaCl, and 50% SiO2. Assuming the student's calculations are correct, explain the student's error in this experiment.
- 1) State whether each of the following experimental errors would raise or lower the mass of the recovered product: a. Too much solvant was used b. The product was not dried completely 2) Would you
- The laboratory tech accidentally mixed NaHCO3 with BaCl2-2H2O instead of KCl when preparing an unknown mixture for this experiment. a) How would this mistake affect the calculated percentage of NaHCO3 in the mixture? b) Is it still possible to determine t
- A mixture of potassium chloride and sand was separated, the original sample had mass of 8.1562 g and 2.268 g of sand was isolated, what is the percentage of potassium chloride and sand mixture?
- Provide three errors that one could make when performing column chromatography that would result in poor separation of the desired compound from impurities.
- An element cannot _______. a. be part of a homogenous mixture b. interact with other elements to form compounds c. be part of a heterogenous mixture d. be a pure substance e. be separated into other substances by chemical means
- A 3.000 gram sample of a sand/salt mixture is separated into its individual components. The mass of the beaker alone was 105.974 grams, and the mass of the beaker plus the sand was determined to be 107.133 grams. a. What is the mass of the sand in the mix
- When isolating the components of a three compartment mixture of sodium chloride, silicon dioxide and calcium carbonate, if the percent recovery is less than 100 % what component was recovered least efficiently, and why?
- Consider that you started with 2.101 g of sample of a mixture containing ammonium chloride, sodium chloride and silica and sublimed away 0.810g of ammonium chloride. When you removed all of sodium chloride by dissolving in water, 1.008g of silica was pres
- Mixtures can be separated by the differences in the physical properties of their components. What physical properties could be used to separate the components of the following mixtures? (a) Fine sand and coarse gravel (b) Vegetable oil, Styrofoam, and wat
- Pure substances and mixtures are different because mixtures: a. always have exactly the same composition b. have exact melting points c. retain the properties of the constituents in the mixture d. cannot be separated into their components by physical
- Is sand stirred in water classified as an element, a compound, a homogeneous mixture, or a heterogeneous mixture? Explain.
- A solid mixture weighing 0.05478 ''g'' contained only ferrous ammonium sulfate FeSO_{4}.(NH_{4})_{2}SO_{4}.6H_{2}O,FM\ 392.15 and ferrous chloride FeCl_{2}.6H_{2}O FM 234.84). The sample was dissol
- If you are given a bowl containing a mixtures of 10 gram salt, 90 gram sand and 5 grams of iron filings. How would you proceed to separate the components of the mixture? Design an experiment and write a complete report.
- The ammonium chloride is sublimed prior to adding water to extract table salt from sand. Is it possible to reverse the procedure by adding water first to extract table salt and ammonium chloride prior to heating off ammonium chloride?
- The following process involves a separation of either a mixture into substances or a compound into elements. Decide whether a physical process or a chemical reaction is required: Iron filings are separated from sand by using a magnet.
- Dissolving one substance in another substance is a physical change. Consider a solution of salt or sugar in water: 1) There are no fixed proportions. 2) All of the substances keep their own properties. 3) The mixture can be separated into its parts thr
- Can the relative amounts of the components of a mixture or a compound vary?
- A mixture was found to contain 1.50 grams of NH4Cl, 0.80 grams of NaCl, and 1.20 grams of SiO2. What is the percentage of sand in this mixture?
- Heating a mixture of ammonium chloride and sodium tetrahydridoborate gives one liquid product(X), along with other products, under ambient conditions. Give the identity of compound X.
- State the method used to separate a mixture of sand and water as used in the study of mixture and compounds.
- Propose a scheme and draw a flow chart to use a combination of physical and chemical methods to separate each component from a three components mixture consisting of a mixture of sand (SiO_2) and two water-soluble components (NaCl and CaCl_2). Hint: You
- The laboratory technician accidentally mixed NaHCO3 with BaCl22H2O instead of KCl when preparing unknown mixtures for this experiment. A. How would this mistake affect the calculated percentage of NaHCO3 in the mixture? B. Is it still possible to determi
- Ammonium chloride, NH4Cl, is a white solid. When heated to 325 C, it gives a vapor that is a mixture of ammonia and hydrogen chloride. NH4Cl(s) to NH3(g) + HCl(g) Suppose someone contends that the vapor consists of NH4Cl molecules rather than a mixture
- The mass of an empty filter crucible is 24.1 g. After collecting a precipitate, the crucible mass increases to 26.5 g. The balance measurement error is plus or minus 0.004 g. What is the error in the calculated mass of the precipitate (i.e. mass of crucib
- Milk is best classified as : a) compound because it is a pure substance. b) compound because the proportion of its atoms is fixed. c) a mixture because the proportion of its compound can vary. d) a mixture because the proportion of its components is fixed
- Will the percentage of chloride in your unknown increase, decrease, or remain unchanged if these problems occur: The silver chloride wasn't completely dry when the final weighing was made. The unknown sample contained traces of moisture when it was weig
- Sylvia is doing an elementary experiment regarding separating mixtures. Her mixture contained NaCl, SiO2, and CaCO3. In the beginning, she calculated the mass of her mixture (all components together). As she completed the experiment, some of the elements
- Using aqueous hydrochloric acid, sodium bicarbonate, or sodium hydroxide solutions, devise a flow-chart separation scheme to separate the following two-component mixtures. Both substances are soluble
- Is salt water classified as an element, a compound, a homogeneous mixture, or a heterogeneous mixture? Explain.
- Determine if the following is a pure substance, heterogenous mixture, homogenous mixture, compound, or element. A. Matter with variable composition. Made from two or more substances. B. A mixture made up of particles that are not uniformly distributed.
- The resolution calculated for the TLC separation of a two-component mixture is determined to be equal to 2.0. Does this represent good separation or not? Explain
- The content of a container filled with sand and water would best be described as: A) elements B) a homogeneous mixture C) a heterogeneous mixture D) a compound E) a solution
- You are a lab technician and are mixing salt with water in order to create 250 ml of a 17% salt-solution. Discuss and explain the sources of error that may be occurring in creating the mixtures.
- In gas chromatography, components in a mixture can be separated from one another because these components have different solubilities in the non-volatile stationary phase. Compound X and Compound Y have identical boiling points. Compound X has a greater a
- Can the components of an azeotropic mixture be separated by fractional distillation?
- During separation of a mixture of solids, a very small amount of benzoic acid may not have precipitated but rather may have remained in the sodium chloride solution and passed through the filter paper. How would this affect the final masses of benzoic aci
- A combination of two or more substances in which they no longer retain their chemical properties is called a: A) mixture B) compound C) heterogeneous mixture D) periodic trend E) suspension
- The mass of an empty beaker is 26.7 g. When a mixture of sand, sugar, and marble chips is added, its mass increased to 28.1 g. Water is then added to the mixture and after thorough mixing, the aqueous layer is transferred to an empty evaporating dish that
- Find given matters are homogeneous or heterogeneous mixtures. I. Sugar II. Milk III. Salt water mixture IV. Gas mixtures V. Ice water mixture VI. Naphthalene water mixture
- After removing NaCl from a mixture of lime and sand, is the remaining mixture homogeneous or heterogeneous? Explain.
- Paper chromatography was completed on a three-component mixture. The result was only two spots on the paper (shown below). What conditions or parameters would you change to resolve (separate) the overlapping components?
- During heating some solution of NaCl splattered out of the evaporating dish. how would this affect the calculated percentage of mixture recovered upon separation?
- The following equilibrium was studied by analyzing the equilibrium mixture for the amount of HCl produced. A vessel whose volume was 1.25 L was filled with 0.0125 mol of lanthanum(III) chloride, LaCl3, and 0.0250 mol H2O. After the mixture came to equilib
- A sample is a mixture of AgNO3, CuCl2, and FeCl3. When a 1.0000-g sample of the mixture is dissolved in water and reacted with excess silver nitrate, 1.7809 g of precipitate forms. When a separate 1.0000-g sample of the mixture is treated with a reducing
- Would the following errors cause an increase or decrease in absorbance and % Transmittance? a. Insoluble particles were accidentally pipetted into the cuvette with the solution the cuvette was wet and not pre-rinsed with the solution. b. Fingerprints w
- Chemical testing using ceric ammonium nitrate to identify alcohol common errors which can occur in the test.
- Is a liquid that separates into three distinct layers classified as an element, a compound, a heterogeneous mixture, or a homogeneous mixture?
- A mixture of BaCl2 and NaCl is analyzed by precipitating all the barium as BaSO4. After the addition of an excess of Na2SO4 to a 3.988-g sample of the mixture, the mass of precipitate collected is 2.113 g. What is the mass percentage of barium chloride in
- A lab technician accidentally mixed Aluminum chloride, silver chloride and sodium chloride. Describe the procedure he used to separate the three chemicals into constituent components.
- You put 1 spoonful of salt into 1 liter of water and stir. The resulting liquid is an example of a/an \\ a. pure substance b. heterogeneous mixture c. homogeneous mixture d. immiscible mixture
- You are given a mixture of table sugar, sand, and water. How could you separate and collect the components of this mixture in their natural states?
- Is soil classified as an element, a compound, a homogeneous mixture, or a heterogeneous mixture? Explain.
- Identify differences between pure substances and mixtures. (Check all that apply). a. Mixtures can be separated into their components only by chemical changes; some pure substances can be separated into components by physical change. b. Mixtures can be se
- Calculate the fraction of lattice sites that are Schottky defects for sodium chloride at Its melting temperature (801 degrees C). Assume an energy for defect formation of 2.3 eV.
- Using aqueous hydrochloric acid, sodium bicarbonate, or sodium hydroxide solutions and ether, devise a separation scheme (in the form of a flow chart) to separate the following four-component mixture.
- When mixtures of gaseous H2 and gaseous Cl2 react, a product forms that has the same properties regardless of the relative amounts of H2 and Cl2 used. How is this result interpreted in terms of the law of definite proportion?
- In chromatography, components of a mixture distribute themselves between the stationary phase and the mobile phase. How can the components be separated with these two phases?
- A mixture contains only sodium chloride and potassium chloride. A 0.1586-g sample of the mixture was dissolved in water. It took 22.90 mL of 0.1000 M AgNO3 to completely precipitate all the chloride present. What is the composition (by mass percent)
- Match the following a) solute b) solution c) solvent A) a component of a solution that is present in less B) the solution component that is present in the lab C) a homogeneous mixture of two
- Oggie has a homogeneous mixture of salt and water that he wants to separate. What separation method should Oggie use for his saltwater solution? A: He should use evaporation because this allows the particles of salt to slowly group together and crystaliz
- Classify table salt as one of the following. a. element b. compound c. homogeneous mixture d. heterogeneous mixture e. energy f. none of the above
- All of the following processes lead to an increase in entropy EXCEPT? a. decreasing the volume of a gas. b. melting a solid. c. chemical reactions that increase the number of moles of gas. d. forming mixtures from pure substances. e. increasing the temper
- Are sand and water a pure substance, a homogeneous mixture, or a heterogeneous mixture? Explain.
- Sublimation is a common technique used in the separation schemes. Naphthalene, found in mothballs, sublimes easily, How can naphthalene be separated from a mixture of KBr and sand.
- When finely divided solid sodium is dropped into a flask containing chlorine gas, an explosion occurs and a fine powder of sodium chloride is deposited on the walls of the flask. Write the unbalanced chemical equation for this process.
- A substance that can't be chemically broken down into simpler substances is ______. (a) a compound (b) an element (c) an electron (d) a heterogeneous mixture (e) a homogeneous mixture.
- A student recorded the mass of a two-component solid mixture and then separated the two components and determined their individual masses. The student found the mass of one of the components to be greater than the mass of the original mixture. Explain how
- Which of the following most accurately describes a beaker containing table salt, distilled water, and sand? A. homogeneous mixture of three elements B. heterogeneous mixture of three compounds C. homogeneous mixture of three compounds D. heterogeneous mix
- All of the following involve a decrease in entropy except \\ A. Condensation B. Crystallization C. Formation of a precipitate D. Diluting a weak base
- A homogeneous mixture of two substances is a a. colloid. b. suspension. c. solution. d. compound.
- What is it called when a substance cannot be broken down into simpler substances? A) heterogeneous mixture B) compound C) homogenous mixture D) element
- The components listed on the label of a typical box of salt are sodium chloride, sodium silicoaluminate, sodium thiosulfate, and potassium iodide. On the basis of its ingredients, would you conclude that table salt is a substance or a mixture? Explain you
- Assume you have a mixture of naphthalene and benzoic acid that you want to separate. How might you take advantage of the acidity of one component in the mixture to effect a separation?
- Because of the porosity of the filter paper some of the CaC2O4 . H2O precipitate passes through. Will the reported percent of the limiting reactant in the original salt mixture be too high, or too low? Explain.
- The different substances in a mixture \\ a. keep their properties b. form new molecules c. combine chemically d. cannot be separated
- The law of constant composition (also called the law of definite proportions) applies to __________. a. solutions b. heterogeneous mixtures c. compounds d. homogeneous mixtures e. solids
- A mixture was made by adding 2.30 grams of sand to 3.20 grams of table salt. A student separated the mixture and found 90% recovery of the mixture. How much mixture was recovered by the student?
- An 887.0 mg sample of a mixture containing only NaCl and KCl is dissolved in water, and excess AgNO_3 is added to yield 1.913 g of AgCl. Compute the mass-% of each compound in the mixture.
- A mixture of two compounds, A and B, was separated by extraction. After the compounds were dried, their masses were found to be: 117 mg of compound A and 91 mg of compound B. Both compounds were
- Homogeneous mixtures are also known as _______. a. solids b. compounds c. elements d. substances e. solutions
- Classify each substance as a pure substance or mixture. If it is a pure substance, classify it as an element or compound. If it is a mixture, classify it as homogeneous or heterogeneous. a) sand b) coffee with cream and sugar c) sodium chloride
- Consider the following errors that could be made when running TLC. Indicate what should be done to correct the error. a) A two-component mixture containing 1-octene and 1,4-dimethylbenzene gave only one spot with an R_f value of 0.95. The solvent uses was
- Outline a suitable procedure for separating a mixture of sulphur and sand.