In cooking over an open flame, a yellow flame is often observed when some food is spilled into...
Question:
In cooking over an open flame, a yellow flame is often observed when some food is spilled into the flame. What is most likely responsible for the yellow flame color?
Flame:
Flame is a kind of fire present in the gaseous form and is detectable to us. This occurs when the surrounding oxygen reacts with any substance, leading to a chemical reaction. There are different zones of flame with different colors describing different conditions.
Answer and Explanation: 1
Become a Study.com member to unlock this answer! Create your account
View this answerThe {eq}{\rm{N}}{{\rm{a}}^{\rm{ + }}} {/eq} ions are responsible for the yellow flame color, and it emits a characteristic yellow color light when we...
See full answer below.
Ask a question
Our experts can answer your tough homework and study questions.
Ask a question Ask a questionSearch Answers
Learn more about this topic:

from
Chapter 20 / Lesson 1What is a bunsen burner? Identify, label, and understand functions of the various parts of a bunsen burner. Learn what a bunsen burner can be used for.
Related to this Question
- A woodfire in a fireplace typically has a yellow flame whereas a (natural) gas fire (for a kitchen stove) is typically blue. Explain why the appearance of the wood flame is yellow whereas the gas flame most often appears blue.
- A wood fire in a fireplace typically has a yellow flame whereas a (natural) gas fire (for a kitchen stove) is typically blue. Explain why the appearance of the wood flame is yellow whereas the gas flame most often appears blue.
- In a flame test, after heating, an element emits a light pinkish-violet color. Identify which element is it.
- When performing flame tests in general chemistry, is the anion or cation responsible for the color of the flame?
- In a bunsen burner experiment, when you place a piece of soot-covered chalk over the hottest part of the flame, it changes back to a white color. What is the equation for this process?
- If a glass rod was heated in a burner flame and gave off a bright yellow flame, what metal ion predominates in the glass rod?
- What would need to be done to a Bunsen burner in order to change a luminous yellow flame into a non-luminous blue flame?
- What flame test color would be produced for Tums with its active ingredient CaCO3?
- We did a flame test to see what substances produce what colors when burned. Explain why each of the different elements has a different atomic emission spectrum. Would the flame tests be useful for det
- 1. You found an unlabeled powder in the General Chemistry Lab. You dissolved it water and performed a flame test. The flame turned a bright yellow color. You then measured the electrical conductivity
- An unknown compound, believed to be a hydrocarbon, showed the following behavior: it burned with a yellow sooty flame, no heat or color appeared when sulfuric acid was added; permanganate solution rem
- What adjustment should you make to a Bunsen burner (a) to correct a flame with an orange tip? (b) to correct a ragged, noisy flame?
- What flame test color would be produced for the compound salt substitute with its active ingredient KCl?
- A candle flame produces easily seen specs of soot near the edges of the flame, especially when the candle is moved. A piece of glass held over a Candleflame will become coated with soot, which is the
- Which of the following is not a physical property of matter? a. odor b. melting point c. color d. flammability (likelihood of burning)
- You and your partner were carrying out flame tests side-by-side. Your partner tested a known solution of RbNO3 and observed a purple flame. You tested an unknown sample and observed a red flame. What can you say about the cation present in the unknown bas
- If you have a properly adjusted hot flame, which is pale blue with three distinct comes, what is observed if the gas control valve is slightly closed versus what's observed if the air control valve is
- The candle flame produces easily seen specks of soot near the edges of the flame, especially when the candle is moved. A piece of glass held over a candle flame will become coated with soot, which is
- A candle flame produces easily seen specks of soot near the edges of the flame, especially when the candle is moved. A piece of glass held over a candle flame will become coated with soot, which is th
- A weighed sample of yellow sulfur is placed in a flask. The flask is gently heated using a Bunsen burner. Observation indicates that nothing appears to happen to the sulfur during the heating, but the mass of sulfur is less than before the heating, and th
- In what piece of equipment are gas and air mixed and then burned to produce a flame?
- Sodium is a common element (in table salt!) and was one of the first to have its spectrum identified when salt was sprinkled into a flame. A closer inspection revealed that the characteristic yellow color was two spectral lines close to one another. The s
- (a) Do you expect toluene to produce soot as it burns? Why? (b) Would you expect the flame to be blue or yellow?
- The flame produced by the burner of gas (propane) grill is a pale blue colour when it mixes with propane (C_3H_8) to burn it completely. For every gram of propane that flows through the burner, what volume of air is needed to burn it completely? Assume th
- Fe^+3 + SCN <=> FeSCN^2+ (Light Yellow) <=> (Deep Red) For the reaction above, when placed in an ice bath, the reaction became a deeper red color. This means that the reaction is a. Exothermic b.
- In the flame test, Magnesium Chloride is colorless but Magnesium metal burns as bright white. Why?
- 1. An unknown solution gave a strong yellow flame test. The solution gave no reaction with ammonium carbonate, ammonium phosphate, or ammonium sulfate. The halide test produced a yellow-orange color i
- A white powder treated with dilute HCl acid dissolves quickly, and the reaction is featured with intensive bubbling. During a flame test of the resultant solution, the flame turns brick red in color. From the chemical point of view, this white powder coul
- The dazzling colors seen in fireworks are due to different metal compounds, which are heated to high temperatures, similar to flame tests. What metals are responsible for the following colors seen in fireworks? A.) Yellow-Orange B.) Blue-Green C.) Red-Ora
- The flame produced by the burner of a gas (propane) grill is a pale blue color when enough air mixes with the propane (C3H8) to burn it completely. For every gram of propane that flows through the burner, what volume of air is needed to burn it completely
- Identify which substances you would put into a firework to delight a crowd of spectators. (this is a post-lab question regarding electron configuration. LiCl had a red flame, NaCl and CaCl2 had an orange flame, and KCl had a blue flame).
- White phosphorous spontaneously bursts into flames in oxygen. If 6.500 g of white phosphors reacts with oxygen to form 11.54 g of a phosphorous 11.54 g of a phosphorous oxide, the empirical formal of this oxide is P_4O_4.
- Place the following elements in order from lowest energy to highest energy based on the color they emit during a flame test. \\ Sodium (yellowish orange) Copper (bluish-green) Potassium (pale violet) Strontium (red)
- If a student's clothes catch fire from the open flame of a Bunsen burner, the student must be sprayed with the fire extinguisher?
- When a solid piece of grey, shiny, sodium metal is exposed to yellow chlorine gas, a large amount of heat
- A compound F on heating gives a cracking sound and G give reddish-brown fumes when hot, and yellow when cool, and a gas H light a glowing splint and a residue J. Identify F, G, H, J. What are the name
- Why does molten iron that is heated until white-hot and then poured into a mold changes its color from yellow to red as it cools?
- When performing a flame test you are told that a rubidium solution will produce a violet color, but an actual test of the solution produces a yellow color. Select the potential source(s) of error. - There was a contaminant in the rubidium solution. - The
- When sulfur is heated until its boils, its color and viscosity will change continuously. The series of changes are described in the following five stages (A to E) : A : yellow powder, m.p 113^oC, b.p 444^oC = (113 C) B B : Deep yellow liquid = (200-250^
- Why is the Bunsen burner flame hotter after air is mixed with the gas?
- Name the two types of flames produced by the Bunsen burner as used in the chemistry laboratory.
- Three people are gathered around a campfire. One has his hands cupped around a ceramic mug of hot chocolate to warm them. Another is toasting a marshmallow above the fire. The third is roasting a hot dog above the glowing coals. Identify the primary sourc
- Butter yellow is a dye once used to color margarine. It has since been shown to be carcinogenic and its use in food is no longer permitted. Referring to the synthesis of methyl orange as a guide, outline an experimental strategy for its synthesis, using a
- When a metal is heated in a flame, the flame has a distinctive color. This information was eventually extended to the study of stars because: a) a red shift in star color indicates stars are moving away. b) star color indicates the distance from the earth
- Most fire deaths occur outside the room of fire origin, and people outside the fire room may be exposed to the toxicity of prominent fire gases. What are the most important toxic gases in smoke? Which are narcotic gases and which are irritant gases?
- Which of the following food coloring agents absorbs at the longest wavelength? A. Indigo carmine (blue #2) B. Erythrosine (red #3) C. Tartrazine (yellow #5) D. Fast Green (green #3)
- An unknown solution gives a brick red flame test with flashes of yellow. The unknown gives a white precipitate with ammonium carbonate and ammonium phosphate, but no reaction with ammonium sulfate. th
- What tool is used for picking up hot crucibles, wire gauze, and small evaporating dishes and also used for holding items in flame?
- Tongs are used to hold a sugar cube in a flame. When a portion of the cube begins to turn brown, the cube is removed from the flame. After cooling, the heated portion of the cube is brown and has a burnt aroma. Analysis tells us that the cube lost mass.
- Use your knowledge about the properties of a gas to describe the following: A container of non-stick cooking spray explodes when thrown into a fire
- An ingredient often found in a food sample is folic acid (C19H19NO6). Why is this ingredient not analyzed by combustion analysis?
- Propane (C_3H_8) is a common gas used for generating flames for cooking and camping. It undergoes a combustion reaction with excess oxygen (O_2) to yeld carbon dioxide (CO_2), water (H_2O), and heat. Suppose that you only have 82 g propane for your trip.
- A mixture of acidified K 2 C r 2 O 7 and 10% K I is titrated against N a 2 S 2 O 3 (Sodium thiosulphate) solution using starch indicator. What is the color of the reaction mixture at the end point? (A) Yellow (B) Blue (C) Green (D) Colorless
- In attempting to characterize a substance, a chemist makes the following observations: (a) It is silvery-white with a metallic luster (b) It melts at 649^\circ C and boils at 1105^\circ C (c) It burns in air producing an intense white light (d) It has a d
- Why would it be better to use lighter-colored lights (like yellow) in a spectroscopy experiment, rather than a green-colored light? If green is used instead of yellow, would absorbance values be higher or lower?
- When doing the flame test, why is magnesium chloride colorless while magnesium is bright white?
- Fe^{3+} (yellow) + SCN (colorless) leftrightarrow [FeSCN]^{2+}(dark red) If Fe^{3+} is added to the solution: (a) The solution turns darker red (b) The solution becomes more yellow (c) No changes in color occur (d) The solution becomes colorless
- Consider potassium atoms in a flame atomizer. The 4s to 40 transition has a spectral doublet at 766 nm. Potassium can be determined by flame-AES or flame-AAS, but the signal in Flame-AES is very noisy. Explain why this is so and also why ICP-AES achieves
- If I heated NaNO3, would there be yellow gas inside the test tube?
- Which of the following actions are appropriate if your clothing catches on fire? a. stop, drop, and roll b. use the safety shower to extinguish the flames c. use a fire blanket to smother the flames d. all of the above
- What color did the bromothymol blue indicator turn when it was added to the test tube containing citric acid? a. Colorless b. Yellow c. Blue d. Red
- You are given the task of identifying an unknown substance found at a crime scene. Which method would be better for you to implement to identify elements present in the substance, using a series of flame tests or analyzing the emission spectra?
- Which of the following is a chemical change? a. Sawdust is produced from wood being cut by a power saw b. Fireworks explode in a colorful display c. Juice is obtained from an orange d. Water freezes to form ice
- Which of the following is recommended for extinguishing or controlling the spread of alkali metal fires? a) Water b) Dry-Chemical c) Carbon Dioxide d) Oxygen
- A shiny brown-colored element X on heating in air becomes black in color. Name the element X and the black-colored compound formed.
- Identify the orange-brown gas sometimes seen in haze. a. nitrogen oxides b. sulfur oxides c. carbon dioxide d. carbon monoxide e. ozone
- If you were cooking food in boiling water on the stove, could you increase the speed of cooking by increasing the heat? Why or why not?
- Smoke is sometime white appearance and sometime black. Both soot and aerosols reduce the ability to see in a fire. What is the reason for different colors? Why is there a difference, or if there is no difference?
- What is the chemical nature of blue-dextran (blue), cytochrome (red), vitamin b12 (orange) and DNP-glycine (yellow) separated on CM-Sephadex, that is, what is the light absorbing component that gives it a visible color?
- Flammable materials, like alcohol, should never be dispensed or used near: a. an open door b. an open flame c. another student d. a sink
- During the atomic flame test, using the Biomicroscope was extremely difficult. How do you read it when it barely shows up when looking at a flame?
- A flame test could be used to distinguish which of the following two substances? a. bismuth and lead nitrate b. lithium nitrate and strontium nitrate c. copper(II) chloride and calcium sulfate d. arsenic acid and lead nitrate
- The combustion of an organic compound in the presence of excess oxygen produced a gas, which makes clear lime water turbid. What element can be identified?
- Of the metal ions tested of an example experiment, sodium produces was the brightest and most persistent color in the flame. Could potassium be detected visually in the presence of sodium by burning t
- A moderately reactive metallic element (whose melting point is 850 degrees C) burns in a container of a greenish gas (also an element) to produce a white solid. The white solid dissolves in water to form a clear solution. When carbon dioxide gas, CO2, is
- If a colorless liquid with a pungent odor is added slowly to another colorless liquid, a dark brown precipitate is produced that later dissolves to produce a colorless solution. What are the two colorless liquids?
- If there is a spill of liquid hydrogen, why will it likely burst into flame spontaneously?
- What is hottest part of the gas flame is called? a) blue zone b) luminous zone c) dark zone d) non-luminous zone
- After having a glass of red wine, a chemistry student rinsed her glass in the sink. When the tap water ran into the glass, the wine residue changed from a deep red to a light-blue color. How could this student explain what is causing this color change?
- A sample of mercury(II) oxide was heated to produce mercury metal and oxygen gas. Then the liquid mercury was cooled to 240 degrees C, where it solidified. A glowing wood splint was thrust into the oxygen, and the splint burst into flame. Identify each ph
- For a TLC plate experiment using paprika, 1. Why are the paprika pigments colored, while the common analgesics you tested are colorless?
- When working with flammable chemicals, what should never be in the area? a. plants b. plastic containers c. other chemicals d. open flames
- Burning an empty styrofoam container results in volumes of black sooty flames. On the basis of this observation alone, to what class of hydrocarbons would you suspect a component of the polystyrene polymer found in styrofoam belongs? Explain.
- Magnesium metal is very malleable and is able to be pounded and stretched into long, thin, narrow "ribbons" that are often used in the introductory chemistry lab as a source of the metal. If a strip of magnesium ribbon is ignited in a Bunsen burner flame,
- What procedures should you follow to: 1. report spilling a chemical or breaking equipment 2. cope with a fire on your lavatory bench 3. dispose of cracked or broken glassware
- Sodium bicarbonate is useful as a fire extinguisher because (a) It serves as a blanket for fire. (b) It releases water which extinguishes fire. (c) It emits a foam that extinguishes fire. (d) It decomposes on heating to give carbon dioxide.
- Humans long ago discovered that they could make soap by cooking fat with ashes from the fire. This is because the ash contains potassium hydroxide which reacts with the triglycerides in the fat to form soap. The chemical reaction for this process is: C3H5
- A chemist ran a number of qualitative tests on a sample of CsMnO4 and recorded the following data. l. a resulting solution did conduct electricity. ll. the flame test of a resulting solution produced a violet colour. lll. a precipitate formed when LiC
- 3. A student, following the procedure in this experiment, studied the response of red food dye to visible light and analyzed a stock solution of red food dye of unknown concentration. A series of dilu
- Melamine, used as a fire retardant and a component of the writing surface of white boards, can be prepared from s-trichlorotriazine through a series of S_NAr reactions with ammonia. The first substitution takes place rapidly at room temperature. The secon
- If something is wrapped in aluminum foil and set on fire, will the object inside burn? Will it feel the heat?
- Green fruits can be made to ripen artificially before their maturity time. Name the gas responsible for this phenomenon.
- After correctly preparing a Beer's law plot for the yellow food dye, a student read the percent transmittance of the unknown solution but neglected to zero the spectrophotometer with a water blank. Sh
- In a barbecue, you use charcoal to cook your food. You start with 10 pounds of charcoal. After you finish cooking the food, you only have a small amount of ash (much less than 10 pounds) left in the grill. a. What happened to the charcoal? b. Does the law
- Butane (C4H10) is fed to a fired heater at a molar flow rate of 100 mol/h and 50% excess air to partially combusted (Hint: two independent chemical reactions!). Only 50% of the butane is consumed, and